Flexo Inks

Eurosun (ES) Serie

An NC-solvent based inks series designed for flexo surface printing.

Substrates:HDPE, LDPE, paper, board etc.

TECHNICAL PROPERTIES

  • According to the substrate heat resistance is between 140C-160C (3bar ,1 sn)
  • Good ink transfer
  • Does not contain TAA or Phtalate
  • To increase scratch and scuff resistance add KA-0017 additive by 10%-15%
  • Not suitable for lamination
  • Production Viscosity : 30-35 sn/D4/25 C

 

PRINTING REQUIREMENTS

Printing Viscosity

  • Flexo with Dr. Blade : 22-25 sn./D4/25C
    Flexo without Dr. Blade : 18-22 sn./D4/25 C

Printing Viscosity Preparations

  • for Flexo : 80% Ethyl Alcohol-20% Ethyl Acetate mixture (4-1)

Drying Time Adjustments

  • Accelerator : Ethyl Acetate
    Retarder : Ethoxy Propanol or Methoxy Propanol

 

SHELF LIFE

  • Shelf life of ES series is 1 years in unopened packaging
  • Shelf life of golds, imitation golds, silvers are 6 mont in unopened packaging
  • Shelf life of inks containing fanal pigments are 1 month

 

Eurosun (ES) Serie
Click the link below to download the PDF file.
warning ikon
Perform safety test.
error ikon
Safety test failed.
warning ikon
You can send 5 messages in one hour! Your hourly message sending limit is over.
success ikon
Your message is successfully sent. Our authorized officers shall contact you as soon as possible.
error ikon
A failure occured
success ikon
Your record has been successfully sent.